Blog

Hot asphalt can foul a radar nozzle even when the reading looks steady. Check METRAVON MV-RD15G thermal limits and transfer run-on before specifying the tank assembly.

Specify clinker-silo radar using actual heat exposure and feed run-on. Assess METRAVON MV-RD21G limits, mounting clearance and shutdown tests before accepting a quote.

For port grain silos, stopping a conveyor does not stop material already in transit. Check MV-RD21 headspace, route timing and response before setting thresholds.

Hazardous-waste tank level selection depends on chemistry and the entire wetted assembly. Review MV-RD12 evidence while specifying separate overfill and leak safeguards.

How much storage remains when a leachate pump fails? Specify METRAVON MV-RD12T monitoring around basin elevations, chemical exposure and the required alarm response.

Set wet-well radar filtering against the time available to start pumps. Review METRAVON MV-RD13S mounting and failure response before approving the station design.

Surface velocity alone is not canal discharge. Specify METRAVON MV-RD2480 with a surveyed section, site calibration and valid-data rules for irrigation volume records.

Plan river level monitoring with METRAVON radar sensors. Verify datum, timestamps and missing-data handling, then request an instrument review for your station site.

Assess METRAVON MV-RD12T for clean-water reservoir level monitoring. Check pump logic, signal faults and installation details before requesting a complete quotation.