Blog

A fixed cable anchor creates a mechanical load path, not merely a steadier signal. Check MV-RD701 probe weight, process drag and thermal movement before adding restraint.

Two liquids do not establish that a guided wave radar can report an interface. Confirm the output, upper-phase behaviour and reference test before control design.

A radar measures a local surface, not tonnes. Combine MV-RD21 distance with vessel geometry, pile observations and grade-specific density before quoting silo inventory.

Level becomes volume only through a verified tank model. Use MV-RD12 distance with a consistent datum, test horizontal-tank geometry and retain the raw value for audit.

Bulk density is not a reflection specification. Select MV-RD21 from material state, pile geometry, dust and a representative echo trial at the required distance.

False-echo mapping can hide the liquid return if learning conditions are wrong. For MV-RD12, preserve the curve, identify the reflector and retest surface tracking.

Outdoor radar protection depends on glands, cable routes, heat and the housing. Specify the MV-RD12 assembly and verify water paths, signal circuits and access on site.

An Ex label alone cannot approve a radar for a classified area. Match the exact assembly, marking and certificate conditions to the site before accepting the quotation.

Insulating over a cooling section can raise electronics temperature. Show the MV-RD12G insulation boundary, hot surfaces and air clearance on the installation drawing.