Chinese
Spanish
Russian
Portuguese
French
German
Indonesian
Thai
Vietnamese
Arabic
Italian
Turkish
Polish
Japanese
Technical Articles
This section focuses on radar level meters, level switches, weigh modules, weighing indicators and industrial data acquisition, sorting out knowledge on principles, selection, installation.
-
Radar Commissioning Errors: Separate Offset, Scaling and Echo Problems2026-09-03Diagnose METRAVON MV-RD12 radar commissioning errors from signed differences at known levels. Separate reference, scaling and echo checks before adjusting the system. -
Radar Water-Level Survey: Resolve Staff-Gauge Disagreement Before Applying an Offset2026-09-02Use a radar water-level survey to reconcile staff gauges, mounting datums and surface location. Ask METRAVON to review MV-RD12T siting before applying a reading offset. -
Wet-Well Level Monitoring: Diagnose Pump Cycling Before Adding More Damping2026-09-01Improve wet-well level monitoring by separating surface movement from pump logic faults. Send METRAVON operating trends and geometry to assess an MV-RD12T installation.
-
Open-Channel Flow Measurement: Verify Weir and Flume Head2026-09-01Assess METRAVON radar for weir and flume flow measurement. Check head reference, geometry and tailwater limits, then request a proposal with the primary-device data.
-
Radar vs Ultrasonic vs Capacitive Level Measurement: Select by Duty2026-08-10Radar, ultrasonic and capacitive instruments solve different duties. Compare gas space, product contact and maintenance access before selecting an MV-RD12 arrangement.
-
Radar Level Meter Replacement: Revalidate the Parts and Signal Path2026-08-10Replacing radar electronics is different from replacing the full process assembly. Check MV-RD12 or MV-RD13 support, geometry, settings and signal tests before release. -
Radar Level Meter Maintenance Interval: Use Condition and Duty2026-08-10Set MV-RD21 maintenance intervals from deposits, diagnostics and duty rather than a calendar alone. Keep inspection, cleaning and output-chain tests as separate records. -
Radar Level Meter Acceptance Record: Correct Errors and Retain Test History2026-08-10Review METRAVON MV-RD12 acceptance records before handover. Separate clerical corrections from changes requiring retesting, and keep the original test evidence traceable.
-
Surface Velocity to Mean Velocity: Calibrate Radar Flow at the Site2026-08-10Surface velocity is not cross-section mean velocity. Pair MV-RD2480 data with independent discharge and area references before accepting a site-specific conversion.
