Industry Insights

Select high-temperature load cells by thermal limits, heat transfer, expansion, capacity, mounting, electronics, calibration and maintenance requirements.

Choose a level switch for a toren air or water-tank system by defining pump logic, tank geometry, water quality, contact rating, fail-safe behavior and testing.

Select waterproof load cells by IP rating, seal design, cable entry, washdown chemicals, condensation, junction boxes, drainage, inspection and calibration.

Select high-pressure level switches by pressure-temperature rating, fluid properties, chamber design, materials, process connections, fail-safe output and proof-test requirements.

Improve batching accuracy through correct load cells, hopper mechanics, feeder cut-off, material in flight, calibration, moisture compensation, diagnostics and maintenance.

Select and maintain boiler level switches by pressure, temperature, water conductivity, float or electrode design, redundancy, blowdown, alarms and proof testing.

Select tensile load cells by force range, bidirectional duty, alignment, rod-end mounting, fatigue, overload, environment, electronics, calibration and safety requirements.

Select sewage level sensors for wet wells by foam, solids, grease, vapour, pump control, installation, redundancy, hazardous-area needs, cleaning and proof testing.

Design hopper weighing with correct load-cell capacity, weigh modules, piping isolation, thermal movement, corner checks, calibration, batching logic and maintenance access.