Chinese
Spanish
Russian
Portuguese
French
German
Indonesian
Thai
Vietnamese
Arabic
Italian
Turkish
Polish
Japanese
Technical Articles
This section focuses on radar level meters, level switches, weigh modules, weighing indicators and industrial data acquisition, sorting out knowledge on principles, selection, installation.
-
26 GHz Radar Level Transmitter Selection: Match the Antenna to the Liquid Tank2026-09-14Select a 26 GHz radar level transmitter by antenna, tank opening and process limits. Compare METRAVON MV-RD901 and MV-RD902, then submit your tank drawing for review. -
Load Cell Cable Shielding and Grounding: Diagnose Noise Before Rewiring2026-09-12Review METRAVON signal cables for industrial weighing. Check noise sources, sense wiring and shield connections before requesting cable specifications for your route. -
Load Cell Junction Box Selection: Signal Trim, Excitation and Corner Checks2026-09-12Compare METRAVON junction boxes for multi-cell weighing. Check trim method, bridge drive and enclosure requirements before requesting a wiring-based configuration. -
Load Cell to PLC Wiring: Bridge Inputs, 4-20 mA and Modbus RTU2026-09-12Design METRAVON load cell to PLC wiring with bridge excitation, 4-20 mA scaling and Modbus RTU checks. Send your sensor and input details for a configuration review. -
Weighbridge Indicator Replacement: Analog Inputs, Software and Ticket Checks2026-09-12Review METRAVON MV-WI0013 for truck scale replacement. Check analog cell inputs, software messages and ticket records before requesting a matched indicator quotation. -
Weighbridge Load Cell Replacement: Find the Fault and Match the Assembly2026-09-12Plan METRAVON weighbridge load cell replacement: check mounting, bridge signals and fault evidence, then request a matched configuration before lifting the deck.
-
Tension-Compression Load Cell Selection: Test the Full Reversal Cycle2026-09-12Specify METRAVON MV-LC0190 for axial force fixtures. Check load reversal, capacity-dependent sensitivity and bipolar signal handling before requesting a quotation. -
Load Cell Damage Diagnosis: Evidence and Replacement Compatibility2026-09-12Assess suspected METRAVON load cell damage in industrial scales. Check fault evidence, mounting and electrical compatibility before requesting a replacement quotation.
-
Load Cell Failure Symptoms: Locate the Fault Before Buying Sensors2026-09-12Trace load cell failure symptoms from METRAVON sensors to the PLC. Separate mounting, wiring and scaling faults, and prepare useful test records for a technical enquiry.
