Industrial Measurement Blog & Technical Articles

The News Center brings together METRAVON company news, level measurement and industrial weighing technical articles, bulk material industry knowledge and application cases to help users.

Force Washer Transducer Selection for Bolted and Compressive Loads
2026-08-21

Select force-washer transducers by defining preload, compression range, contact surfaces, parallel load paths, stiffness, overload, signal conditioning and calibration.
Industrial Float Level Switch Selection for Tanks and Vessels
2026-08-21

Select industrial float switches by checking liquid density, buoyancy, pressure, temperature, orientation, hysteresis, materials, electrical rating and proof testing.
Load Cell Weighing Transmitter Selection for Process Control
2026-08-21

Select weighing transmitters by matching bridge input, calibration, tare and zero functions, filtering, batching control, communications, diagnostics and fault handling.
Load Cell Transmitter Selection: 4–20 mA, RS485 and Modbus RTU
2026-08-21

Select load-cell transmitters by matching bridge input, excitation, calibration, 4–20 mA scaling, RS485 Modbus settings, isolation, filtering and fault handling.
Load Pin Load Cell Design, Installation and Calibration
2026-08-21

Apply load-pin load cells correctly by defining bearing geometry, shear planes, load direction, pin retention, rotation, overload, cabling and installed calibration.
Weigh Module Selection for Tanks, Hoppers and Process Vessels
2026-08-21

Select weigh modules by calculating support loads, thermal movement, side forces, uplift, piping restraint, mounting stiffness, calibration access and maintenance requirements.
Vibrating Level Switch Selection for Liquids and Bulk Solids
2026-08-21

Select vibrating level switches by checking liquid or solids duty, density, viscosity, buildup, mounting, fail-safe output, proof testing and hazardous-area requirements.
Torque Load Cell Selection for Reaction and Rotary Measurement
2026-08-21

Select torque load cells by defining reaction or rotary duty, torque range, speed, coupling alignment, torsional dynamics, overload, signal transmission and calibration.
Bending Beam Load Cell Selection for Platform and Hopper Scales
2026-08-20

Select bending-beam load cells by checking capacity, minimum load, mounting stiffness, side loads, overload protection, environmental sealing, cabling and calibration.

First << ···29 30 31 32 33··· 31/42 >> Last