Blog

Verify radar output direction using off-centre test points and physical level changes. Ask METRAVON to review MV-RD12 variable assignment before accepting PLC scaling.

Check a radar reading after foam collapse for residue, held data and changed settings. Ask METRAVON to review MV-RD12 event records before recalibrating the liquid level.

Review radar blocking distance without confusing software exclusion and physical limits. Ask METRAVON to confirm the MV-RD12 near-range requirements for your nozzle.

Review a METRAVON MV-RD12 radar test report for unit identity, test points, reference and acceptance scope. Clarify the inspection records required before ordering.

Existing cable can be reused in a level transmitter retrofit only after its circuit, condition and routing are checked. Compare MV-RD12 wiring with the installed loop.

Conflicting drawings and photos can describe different radar nozzles. Reconcile MV-RD12 connection, datum and wiring in a signed site survey before ordering hardware.

Non-contact radar and guided wave radar differ in removal work as well as sensing path. Draw MV-RD12 and MV-RD701 service clearance before choosing a final layout.

A new platform or brace can enter a silo radar beam without touching the sensor. Check MV-RD21 clearance over the full measuring range before retuning echo settings.

An empty silo may still hold stock or expose a low-level target to radar. Define the physical empty state and MV-RD21 acceptance test before applying an offset.